قالب وردپرس درنا توس

Publications

Journal Papers

  1. Anbarsooz, M. Amiri, I. Rashidi, “A novel curtain design to enhance the aerodynamic performance of Invelox: A steady-RANS numerical simulation”, Energy, 168, 207-221, 2019.
  2. Salimipour, M. Anbarsooz, “Surface temperature effects on the compressible flow past a rotating cylinder”, Physics of Fluids, Vol. 31 (2), 2019.
  3. Amiri, M. Anbarsooz, “Improving the energy conversion efficiency of a Savonius rotor using automatic valves”, Journal of Solar Energy Engineering, 2019.
  4. Anbarsooz, H. Rashki, A. Ghasemi, “Numerical investigation of front-wall inclination effects on the hydrodynamic performance of a fixed oscillation water column wave energy converter”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 233 (2), 2019.
  5. R. Erfanian, M. Anbarsooz, “Numerical investigation of body and hole effects on the cavitating flow behind a disk cavitator at extremely low cavitation numbers”, Applied Mathematical Modelling, Vol. 62, pp. 163-180, 2018.
  6. R. Mottahedi, M. Anbarsooz, M. Passandideh-Fard, “Application of a fictitious domain method in numerical simulation of an oscillating wave surge converter”, Renewable Energy, Vol. 121, pp. 133-145, 2018.
  7. Saadatinasab, M. Anbarsooz, M. Passandideh-Fard, “A Numerical Investigation on Energy Absorption from Nonlinear Irregular Water Waves using Bristol Cylinder”, Modares Mechanical Engineering, Vol. 18 (3), pp. 429-439, 2018, (in Persian).
  8. Anbarsooz, “A numerical study on drag reduction of underwater vehicles using hydrophobic surfaces”, Proceedings of the Institution of Mechanical Engineers, Part M: Journal of Engineering for the Maritime Environment, Vol. 233 (1), 2017.
  9. Anbarsooz, M.S. Hesam, B.M. Imani, “A numerical study on the geometrical parameters affecting the aerodynamic performance of Invelox”, IET Renewable Power Generation, Institution of Engineering and Technology, Vol. 11(6), pp. 791-798, 2017.
  10. Ghasemi, M. Anbarsooz, A. Malvandi, A. Ghasemi, F. Hedayati, “A nonlinear computational modeling of wave energy converters: A tethered point absorber and a bottom-hinged flap device”, Renewable Energy, Vol. 103, pp. 774–۷۸۵, ۲۰۱۷٫
  11. Arab, M. Javadi, M. Anbarsooz, M. Moghiman, “A numerical study on the aerodynamic performance and the self-starting characteristics of a Darrieus wind turbine considering its moment of inertia”, Renewable Energy, Vol. 107, 298–۳۱۱, ۲۰۱۷٫
  12. -R. Erfanian, M. Anbarsooz, M. Moghiman, “A three dimensional simulation of a rubber curing process considering variable order of reaction”, Applied Mathematical Modelling, Vol. 40 (19-20), pp. 8592–۸۶۰۴, ۲۰۱۶٫
  13. Anbarsooz, “Aerodynamic performance of helical Savonius wind rotors with 30° and 45° twist angles: Experimental and numerical studies”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol 230(6), pp. 523 – ۵۳۴, ۲۰۱۶٫
  14. Anbarsooz and H. Niazmand, “Heat transfer characteristics of slip flow over solid spheres”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 230(19), pp. 3431 – ۳۴۴۱, ۲۰۱۶٫
  15. -R. Erfanian, M. Anbarsooz, N. Rahimi, M. Zare and M. Moghiman, “Numerical and experimental investigation of a three dimensional spherical-nose projectile water entry problem”, Ocean Engineering, Vol. 104, pp. 397–۴۰۴, ۲۰۱۵٫
  16. Anbarsooz, M. Pasandideh-Fard and M. Moghiman, “Numerical simulation of a submerged cylindrical wave energy converter”, Renewable Energy, Vol. 64, pp. 132-143, 2014.
  17. Sedaghati, R. Kardehi Moghaddam and M. Anbarsooz, “Maximizing extracted energy of a point absorber using GA”, Indian Journal of Scientific Research, Vol. 4(3), pp. 034-040, 2014.
  18. Anbarsooz, M. Pasandideh-Fard, M. Moghiman, “Fully nonlinear viscous wave generation in numerical wave tanks”, Ocean Engineering, Vol. 59, pp. 73-85, 2013.
  19. Niazmand, M. Anbarsooz, “Slip flow over micron sized spherical particles at intermediate Reynolds numbers”, Journal of Mechanical Science and Technology, Vol. 26, pp. 2741-2749, 2012.
  20. Moghiman, A. Jodat, M. Anbarsooz, “Experimental comparison of the ability of Dalton based and similarity theory correlations to predict water evaporation rate in different flow regimes”, Heat and Mass Transfer, Vol. 48(8), pp. 1397-1406, 2012.
  21. Kianifar and M. Anbarsooz, “Blade curve influences on performance of Savonius rotors: Experimental and numerical”, Journal of Power and Energy, Vol. 225, pp. 343-350, 2011.
  22. M. Javadi, M. Anbarsooz, A. Ghobadi and M. Kahrom, “Numerical Investigation of Wind Effects on the Flame Shape of Sarkhoon and Qeshm’s Refinery Flares”, Journal of Applied and Computational Sciences in Mechanics, Year 28, No. 2, 2017, (in Persian).
  23. Kahrom, S. M. Javadi and M. Anbarsooz, “Experimental and Numerical Investigation of the Effect of an Insert on Heat Transfer Enhancement of a Domestic Gas Burner”, Journal of Computational Methods in Engineering, Vol. 31, pp. 47-61, 2012, (In Persian).
  24. Anbarsouz, H. Niazmand, “Thermal Radiation Heat Transfer Effects on Single Fuel Droplet Heat up Considering its Internal Circulation”, Journal of Applied and Computational Sciences in Mechanics, Vol. 23, pp. 67-82, 2011, (In Persian).
  25. H. Niazmand, M. Anbarsooz, “Slip Flow Over Micron Sized Particles at Intermediate Reynolds Numbers”, Mechanical Journal of Tabriz University, Vol. 40(2), 2010, (In Persian))

Conference Papers

  1. J. Zareei, M. Anbarsooz, M. Passandideh Fard, “Numerical Investigation of Tsunami Wave Generation Using a Piston-Type Wavemaker”, The international conference on coasts, ports and marine structures (ICOPMAS), 26-28 November, 2018, Tehran – Iran.
  2. Saadatinasab, M. Passandideh-Fard, M. Anbarsooz, “Numerical Simulation of Fully Non-Linear Irregular Wave by Flap Type Wave Maker”, ۱۲th International Conference on Coasts, Ports & Marine Structures (ICOPMAS 2016), 31 Oct – ۲ Nov, 2016, Tehran – Iran.
  3. Saadatinasab, M. Passandideh-Fard, M. Anbarsooz, “Energy Absorption of Fully Non-Linear Irregular Wave by Bristol Cylinder Wave Energy Converter”, ۱۲th International Conference on Coasts, Ports & Marine Structures (ICOPMAS 2016), 31 Oct – ۲ Nov, 2016, Tehran – Iran.
  4. R. Mottahedi, M. Anbarsooz, M. Passandideh-Fard, “Geometry Effects of an Oscillating Wave Surge Converter on its Energy Absorption”, International Mechanical Engineering Conference (ISME 2017).
  5. R. Mottahedi, M. Anbarsooz, M. Passandideh-Fard, “A New Method for Simulation of Oscillating Wave Surge Converter”, International Mechanical Engineering Conference (ISME 2017).
  6. Anbarsooz, A. Faramarzi, A.M. Ghasemi, “A Numerical Study on the Performance of Fixed Oscillating Water Column Wave Energy Converter at Steep Waves”, Proceedings of POWER & ENERGY Conference & Exhibition, Power & Energy, ASME, 2016.
  7. Niazmand and M. Anbarsooz, “Effects of slip and Marangoni convection on single fuel droplet heat-up in the presence of thermal radiation”, The 6th International Chemical Engineering Congress and Exhibition, Kish Island, Iran, 2009.
  8. Niazmand and M. Anbarsooz, “Effect of thermal radiation heat transfer on single fuel droplet heat-up rate”, The 3rd Fuel and Combustion Conference of Iran, Tehran, Iran, 2010 (Persian).
  9. Tahani and M. Anbarsooz, “Investigating the effect of using functionally graded materials (FGMs) on the maximum stress at the implant-bone interface”, The 15th Iranian Conference on Biomedical Enginering, Mashhad, Iran, 2008 (Persian).
  10. Anbarsooz, M. Javadi, M. Moghiman, G. Ehteshamzade, “Investigating the causes of liners’ burning in gas power plants at their intersection with cross fire tubes”, The 23rd International Power System Conference, Tehran, Iran, 2008 (Persian).
  11. Javadi, M. Anbarsooz, M. Moghiman, G. Ehteshamzade, N. Qorbanpanah, “Representing different solutions for improving the lifetime of Liners and preventing their burning ”, The 17th Annual International Conference on Mechanical Engineering, Tehran, Iran, 2009 (Persian).
  12. Javadi, A. Golshani, A. Ghasemi, M. Anbarsooz and M. Moghiman, “Improving Power Plant Efficiency using Water Droplet Injection in Air Condensers”, International Conference on Computational and Mathematical Engineering, Penang, Malaysia, February 2010.
  13. Kahrom, M. Anbarsooz, M. Javadi, “Optimizing gas heater using boundary layer excitation”, The 3rd Fuel and Combustion Conference of Iran, Tehran, Iran, 2010 (Persian).
  14. A. Kianifar, M. Anbarsooz, M. Javadi, “blade curve influences on performance of savonius rotors: experimental and numerical”, ASME 2010 3rd joint US- European Fluids Engineering Summer meeting, FEDSM-ICNMM2010, Montreal, Canada, 2010
Copyright © Quchan University of Technology